- FS6-611S BANRIN Screwing Machine
- Screwdriver
- Magnetic suction screwdriver
- Blow air screw machine
-
The three axis lock screwing robot, developed by our own, is a perfect substitute for the X.Y flat screwdriver. It belongs to the first house in the industry. Because of the wide range of operation surface, high freedom and flexibility, fast running speed, and self-developed control system with our own run, the Z shaft can be dragged into the screw point position fast, in small space or The problem of product quality has been well solved.
Automatic locking screw machine is the process of automatic transmission, tightening and testing of screws through all kinds of electric pneumatic components. Through the equipment, the screw fastening process is simplified to reduce the number of manual and reduce the adverse factors caused by artificial misoperation. It is a typical non - standard automation equipment.
-
Advantages: large operating space, smaller Z axis limit, fast running speed, high repetition precision, no maintenance, long service life, suitable for one person and multi machine operation, simple structure and high cost performance.
Application conditions: under certain conditions, the screw hole depth of the M1.7~M4.0 range is less than 20mm; the height difference of the screw hole is less than 20mm; the screw length is less than 12mm; the screw hole should be kept perpendicular to the table surface; this feeding mode is limited to a screw.
-
Advantages: large operating space, smaller Z axis limit, fast running speed, high repetition precision, no maintenance, long service life, suitable for one person and multi machine operation, simple structure and high cost performance.
Application conditions: meet certain conditions, suitable for the M1.7~M4.0 range screw; the depth of the sink is less than 40mm; the height difference of the screw hole is less than 20mm; the screw length is less than 10mm; the screw hole should be perpendicular to the table; the screw is iron and the Beatles are configured according to the screw head; when the two different screws are used at the same time, the batch head is used. It needs compatibility and torsional repetition area, and requires a wide range.
-
Optimal & have spent & have spent Point: large work space, the smaller the Z axis limit, running speed, high repeat positioning accuracy, no maintenance, long service life, suitable for more than one machine operation, stable performance, wide application scope. Shorten feed screw time, more efficient.
Application conditions: under certain conditions, applicable to M2.6~M6 range screws; The sink depth is 40mm; The length of the screw is 18mm; The screw hole should be kept perpendicular to the mesa; This feeding mode is limited to one screw.